SHIBAURA ELECTRONICS CO., LTD.

CLOSE
  1. Home >
  2. Products >
  3. Introduction to Our Products >
  4. Thermistor Sensors >
  5. KT1

KT1

Using a bare thermistor chip

Sensing part: epoxy resin   Wire: cross-linked PE parallel, PVC parallel, cross-linked PE double-insulated, PVC double-insulated
Sensing part: epoxy resin   Wire: cross-linked PE parallel, PVC parallel, cross-linked PE double-insulated, PVC double-insulated

Features

Applications Air conditioners (room & outdoor air); fan heaters, washer dryers, printer & multi-function printer chambers (ambient); water heater tanks and toilet seats (surface)
Operating temperature -30 to +80℃
Thermal time constant τ ≒ 5 sec. (in stirred water)
Dissipation constant δ ≒ 5mW/℃
Withstand voltage 1200VAC for 1 sec.
Insulation resistance ≥100MΩ at 500VDC
Resistance R25 = 10kΩ, R25 = 5kΩ Other options available
B constant B25/50 = 4100K, B25/50 = 3950K Other options available

 Note 1) Values in the above table are for reference only.
 Note 2) Unless otherwise stated, the thermal time constant and the dissipation constant are measured in still air.

PAGE TOP