SHIBAURA ELECTRONICS CO., LTD.

CLOSE
  1. Home >
  2. Products >
  3. Introduction to Our Products >
  4. Thermistor Sensors >
  5. KTEP1

KTEP1

Enhanced insulation: using a bare thermistor chip

Sensing part: aluminium   Wire: cross-linked PE parallel, PVC parallel
Sensing part: aluminium   Wire: cross-linked PE parallel, PVC parallel

Features

Applications Heatsinks (surface); printer & multi-function printer chambers (ambient)
Operating temperature -30 to +85℃
Thermal time constant τ ≒ 20 sec. (on an aluminium hot plate)
Dissipation constant δ ≒ 5.5mW/℃
Withstand voltage 1200VAC for 1 sec.
Insulation resistance ≥100MΩ at 500VDC
Resistance Optional
B constant Optional

 Note 1) Values in the above table are for reference only.
 Note 2) Unless otherwise stated, the thermal time constant and the dissipation constant are measured in still air.

PAGE TOP