Standard sensor equipped with a lug terminal having high heat resistanceHeat resistance is compared to other Shibaura sensors equipped with a lug terminal
Sensing part: plated brass Wire: fluorocarbon, silicone rubber,
silicone rubber insulated with glass braid,cross-linked PE,
cross-linked PE parallel, PVC, PVC parallel
Other options available
High heat resistance, fast response and designed for assemblability
|Applications||Automobile inverters, water heater tanks and heat pump water heaters (surface)|
|Operating temperature||-20 to +180℃|
|Thermal time constant||τ ≒ 6 sec. (on an aluminium plate at 100℃）|
|Dissipation constant||δ ≒ 2.5mW/℃|
|Withstand voltage||1250VAC for 1 min. or 1500VAC for 1 sec.|
|Insulation resistance||≥100MΩ at 500VDC|
|Resistance||R100 = 3.3kΩ Other options available|
|B constant||B0/100 = 3970K Other options available|
Note 1) Values in the above table are for reference only.
Note 2) Unless otherwise stated, the thermal time constant and the dissipation constant are measured in still air.