SHIBAURA ELECTRONICS CO., LTD.

CLOSE
  1. Home >
  2. Products >
  3. Introduction to Our Products >
  4. Thermistor Sensors >
  5. TSP1

TSP1

Light touch solution with low cost and high durability

   Cost is compared to other Shibaura soft contact type sensors


Sensing part: polyimide tape   Wire: cross-linked PE<br />Other options available
Sensing part: polyimide tape   Wire: cross-linked PE
Other options available

Features

Applications Fuser rollers for copying machines, printers and multi-function printers (surface)
Operating temperature -20 to +200℃ (at the sensing part)
Please consult us when higher temperatures are required.
Thermal time constant τ ≤ 2 sec. (push-in depth of 1mm on φ25 roller)
Dissipation constant δ ≒ 0.4mW/℃
Withstand voltage 1000VAC for 1 min.
Insulation resistance ≥100MΩ at 500VDC
Resistance R200 = 1kΩ
B constant B100/200 = 4537K

 Note 1) Values in the above table are for reference only.
 Note 2) Unless otherwise stated, the thermal time constant and the dissipation constant are measured in still air.

PAGE TOP